Home News

How to maintain the tightness of carbon steel gate valve

Good quality Cast Iron Butterfly Valve for sales
Good quality Cast Iron Butterfly Valve for sales
I'm Online Chat Now
Company News
How to maintain the tightness of carbon steel gate valve
How to maintain the tightness of carbon steel gate valve

How to maintain the tightness of carbon steel gate valve


The sealing surface is an important part of the carbon steel gate valve and has a great influence on the use of the valve. Therefore, the maintenance of the sealing surface of the valve valve needs to be well done to prevent leakage.
1, should consider the use of fluid media conditions, select the appropriate soft seal to avoid dielectric corrosion or high temperature deformation.
2. The length of the bolts welded on the valve plate should not be too long. Otherwise, the bolts of the carbon steel gate valve will be too long to resist the flow of the valve body and can not play a sealing role; the opening of the screw rod is adjusted during installation, so that the sealing surface is firmly joined.
3, the valve should be marked when adjusting, the switch should pay attention to the strength, the gasket will not be disturbed.
4. Select the appropriate adjustment pad. The pad thickness should not exceed the step height of the sealing surface of the valve disc. The soft sealing pad and the sealing surface of the valve disc can be safely attached.
5. In order to prevent the clamping nut of the carbon steel gate valve from falling off, the nuts should be properly relaxed after being tightened.
6, if the carbon steel gate valves 30С41НЖ surface damage is very serious, it should be automatically abandoned.

Pub Time : 2018-04-23 10:57:08 >> News list
Contact Details
Hebei Peiying Valve Industry Co.,Ltd.

Contact Person: Mr. RICHARD CAO

Tel: 86-311-85209365

Send your inquiry directly to us (0 / 3000)